Starting Your Washer - Whirlpool LSE9355BQ0 Use And Care Manual

O P E R AT I NG YO U R WA SH ER

Starting your washer

A one-button start is available if you want to
use the settings (Regular cycle, 10 minutes
wash time, Extra Large load size, Warm/Cold
temperatures) for the "preset" cycle. Press
START and the wash cycle begins.
To make other selections:
1. Press ON/SELECT
until the light glows by the cycle desired.
2. Press SELECT
below any setting you want to change. See
pages 6-16 for additional information to help
you make selections.
3. Press START.
Stopping and restarting your washer
•
To stop your washer at any time, press
CANCEL.
NOTE: After pressing Cancel, repeat Steps 1-3
above to restart.
Selecting a fabric/cycle
Press ON/SELECT until the light glows by the
desired cycle (Regular cycle, 10 minutes wash
time, Extra Large load size, Warm/Cold tem-
peratures are the preset selections).
6
PRESS
Start
Delay
PRESS
On
Select
PRESS
Select
PRESS
Start
Delay
PRESS
Cancel
YOU SEE
Fabric/Cycles T ime
Heavy
14
Heavy
Regular
12
Perm Press
10
Normal
Delicates
8
H W
and ashables
6
Light
Soak
4
Preset selections
Fabric/Cycles
Heavy
Regular
Perm Press
Delicates
H W
and ashables
Soak
Load Size T emperature
W ash/Rinse
Extra Large Hot/Warm
Hot/Cold
Medium Warm/Warm
Warm/Cold
Small Cold/Cold