Selectable Display Messaging - NEC UNIVERGE SV9100 User Manual

To cancel Call Forward – Both Ring at a forwarding
station:
(1) Pick up the handset or press the Speaker key.
(2) Dial the Call Forward – Both Ring Service
Code (default: 745).
-OR-
(1) Press the Call Forwarding Programmable
Function Key (Service Code 751:14).
(2) Dial 0 (Cancel).
(3) Press the Speaker key or hang up.
SELECTABLE DISPLAY
MESSAGING
To select a message:
(1) Press the Speaker key.
(2) Press the Text Message key (Service Code
751:18 + 01~20).
IN MEETING UNTIL 08:48
List Dir
(3) Use VOL UP or VOL DOWN keys to scroll
through the messages.
(4) For messages 1~8 and 10, enter digits to append
the message, if needed.
Note: You can append messages 1~8 and 10 with
digits (e.g. the time when you get back). You enter the
time in 24-hour format.
STA 12345678
ICM Prog
No. Message
1 IN MEETING UNTIL ##:##
2 MEETING ROOM - #######
3 COME BACK ##:##
4 PLEASE CALL ###########
5 BUSY CALL AFTER ##:##
6 OUT FOR LUNCH BACK ##:##
7 BUSINESS TRIP BACK ##:##
8 BUSINESS TRIP ##########
9 GONE FOR THE DAY
10 ON VACATION UNTIL ##:##
11~20 MESSAGE 11~20
(5) Press Speaker to hang up.
Note: Intercom calls to extensions with Selectable
Display Messaging set will receive a DND signal and
receive the display message on their telephone's display
instead of ringing the display.
Note: To allow calls to ring through and have the
message displayed on the calling extension's display,
cancel DND by pressing the DND key + 0 (DND key
(Service Code 751: Code 03).
36
Change "#" to:
Time (when meeting is
done)
Room name or
extension
Time (when returning)
11 digits (Tel. No.)
Time (when returning)
Time (when returning)
Date (when returning)
10 digits (where
reached)
Date (when returning)