Page 2
Battery LED Bluetooth LED NC LED 1. Charging Charge this unit using the included USB cable before using. The battery LED indicates the battery charge status. • Charging: Lights red • Charging completed: Lights green It will take approx. 2 hours from empty to full charge. This unit can be used for approximately 20 hours when the battery is fully charged.
Page 3
After the Bluetooth LED lights, it blinks in approximately 1 second intervals and this unit enters pairing mode. 3. Select the “DENON AH-GC30” appears on the Bluetooth device to be connected. When connected, the Bluetooth LED on this unit lights for approximately 5 seconds.