Whirlpool LA3800XS Use & Care Manual page 5

To select a
2.
WASH TEMPERATURE
HOT WATER
can be selected by
turning the Control Knob to 12 or
14 mlnutes in the REGULAR HEAVY
Cycle.
All rinses use cold water. Thls saves
energy and helps prevent wrinkles
tram setting Into place.
To select a
3.
WATERLEVEL
WARM WATER
can be selected by
turning the Control Knob to 8 or 10
minutes In the REGULAR HEAVY Cycle.
l
A warm wash Is preset in the SHORT
Cycle. Just turn the Control Knob to
the 6 minute seiflng in that cycle.
HIGH WATER LEVEL.
The washer will
automaflcally fill to ils highest level,
(about 21.7 gals.182.1 L), when the
Control Knob points to a FILL area.
NOTE: The washer will fill
only
when
the Control Knob points to a FILL area.
LOWER WATER LEVELS.
Sefflng the
washer to fill with less wafer also sets
if for a shorter wash tlme.
1.
Push the Control Knob in and turn
if clockwise to a FILL area in the
cycle you want.
2. Pull the Control Knob out the
washer will start to fill.
3. When the washer reaches the
desired wafer level, push
In the
Control Knob and slowly turn it
past the FILL area.
Pull out the
Control Knob to start the washer.
For all rinses, the washer tills to tts
highest level with cold water.
5