Table Of Contents; Introduction - Husqvarna ECA850 Operator's Manual

Introduction............................................................... 2
Safety........................................................................3
Assembly.................................................................. 7
Product description
We have a policy of continuous product development
and therefore reserve the right to modify the design
and appearance of the products without prior notice.
Note: This manual cover both gasoline operated and
battery operated power units.
Cutting attachment overview
ECA 850
4
10
1
2
ESA 850
4
10
1
1. Blade
2. Grease filler cap, bevel gear
3. Bevel gear
4. Cutting attachment guard
5. Shaft
6. Drive disc
7. Support flange
8. Locknut
9. Blade bolt
10. Front guard, for battery power unit.
11. Combination wrench
2

Introduction

5
3
5
3
2
Contents
Maintenance............................................................. 8
Technical data...........................................................9
Intended use
WARNING: Use this attachment only
with products that it is intended for. Refer
to the accessory chapter in the
operator's manual of your product.
Use the attachment for edging lawns only.
8
6
7
7
9
12. Locking pin
13. Operator's manual
Symbols on the cutting attachment
Careless or incorrect use of this
attachment can result in serious or fatal
injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand
11
12
13
6
1153 - 001 - 22.08.2019