Unpacking And Removing; You Will Need - Kenmore 796.3146 Series Use & Care Manual

| UNPACKING AND REMOVING SHIPPING MATERIAL
When removing the washer from the carton base_ be
sure the plastic tub support comes off wi_ the base.
If you must lay the washer down to remove the base
packaging materials, always prote_ the side of the
washer and lay it carefully on its side. DO NOT _ay
the washer _ its front or back.
Tub support
Carton Base
I. After removing the carton and shipping materiai,
lift the washer off the foam base. Make sure the
plastic tub support comes
off
with the base and
is not stuck to the bottom of the washer.
f "x
Pad --
J
x, j
3. Caref:uliy remove the two foam pads which cover
the top sides of the tub guide, making sure not to
leave behind any pieces of the foam_
4. Unfasten the power cord from the back of the
washer.
fTOOLS YOU WILL NEED _-"
• Adjustable Pliers
, Carpenter's Level
j
2. Save the foam b_ock for future use. If the washer
must be moved in the future, this will help prevent
damage to the washer during transportation.
NOTE: To prevent damage, do not remove Re foam
btock until the washer is at the final location.