Bosch DSDA ISCSI DISK ARRAY SERIES DSA-N2B20 Installation Manual page 18

16 en | Configuration through the Web Interface
47. On the Add Initiator Groups screen, click Next.
48. LUN ID: Leave this field blank. The lowest available ID will be used automatically.
49. The changes are summarized on the LUN Wizard: Commit Changes screen.
50. Use the LUN Wizard to create all 16 (or the desired number of) LUNs.
51. It is recommended to change the password for the Web interface access.
52. If no further storage is to be added, disconnect your computer from the storage system.
V 1 | 2008.08
Click Next.
Click Commit to create the LUN.
If the LUN has been created successfully, a Success! screen will display.
The system configuration is now done.
In the navigation panel, select Security > Change Password.
Connect the storage system to the CCTV network by plugging the network cable (not
supplied) into the network port, labeled e0a.
Installation Guide
DSDA iSCSI Disk Array Series
Bosch Security Systems