Regency City Series Owners & Installation Manual page 66

CITY LINE
maintenance
CC40RE/CC40LE OUTER PANELS
Note: Install inner safety glass prior to installation of outer panels-see
instructions in manual
1. Attach Regency logo to the right hand side of outer front panel. The
magnets will be positioned under the outer front base panel to secure
the logo. The logo should be about 76 mm from the right hand corner
of the outer base. Install outer front and side base panel.
Outer base panel install
2. Install side panels - the side panels are secured in place by existing
magnets in the unit.
Outer side panel install
3. Install outer safety glass.
4. Reverse steps to remove panels.
66 | City Series ACC40E
Location of
Regency Logo