Table of Contents
Advertisement
For best results, use warm water
for soaking
or prewashing
stained
laundry
Hot water
can set stains.
1. Use recommended
amount
of
detergent
or pre-soa k product.
2. Push Control
Knob in.
3. Turn clockwise
to point at a
number
in the SOAK Cycle.
Use the
4 minute mark for a pre-wash?
4. Pull Control Knob out. The washer
will start.
5. When the cycle
is over, add
detergent
for the next selected
wash cycle.
The SOAK Cycle
should
always
be followed
by a
Wash Cycle.
Important:
See additional
care
informatlon
in your "Laundry
Guide!'
*To start soak or pre-wash
with agitation,
the Control Knob
must point to a number
in the SOAK Cycle.
Liquid bleach dispenser
Always
measure
bleach.
Do not
guess. Never use more than 1 cup
(250 ml) for a full load.
Use less with
lower water level settings. Follow
directions
on bottle for safe use. Use
a cup with a pouring
spout to avoid
spilling.
1. Load the washer first.
2. Pour measured
bleach
carefully
into dispenser.
DO NOT let bleach
splash, drip or run down into the
washer
basket. Undiluted
bleach
will damage
any fabric
ft touches.
3. Start the washer. Bleach will be
diluted
automatically
during
the
wash part of the cycle.
For more information
on bleaching,
see your "laundry
Guide!'
13
Advertisement
Table of Contents
