1. Manuals
  2. Brands
  3. Viessmann Manuals
  4. Security Sensors
  5. CO detector
  6. Installation and service instructions for contractors

Viessmann CO detector Installation And Service Instructions For Contractors

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Installation and service
instructions
for contractors
CO detector
Safety instructions
Please follow these safety instructions closely to prevent accidents
and material losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!
Please note
This symbol warns against the
risk of material losses and envi-
ronmental pollution.
Note
Details identified by the word "Note"
contain additional information.
Installation, initial start-up, inspection,
maintenance and repairs must only be
carried out by a competent person
(heating engineer/installation contrac-
tor).
Exclusion of liability
No liability is accepted for loss of prof-
its, failure to make savings or other
direct or indirect consequential losses
arising from use of the CO detector, or
for losses arising from improper use.
5777 134 GB
6/2016
VIESMANN
Before working on the equipment/heat-
ing system, isolate the power supply
(e.g. by removing a separate mains
fuse or by means of a mains isolator)
and safeguard against unauthorised
reconnection.
When using gas as fuel, also close the
main gas shut-off valve and safeguard
against unauthorised reopening.
Repairing components which fulfil a
safety function can compromise the
safe operation of your heating system.
For replacements, use only original
spare parts supplied or approved by
Viessmann.

Advertisement

Table of Contents
loading

Related Manuals for Viessmann CO detector

Summary of Contents for Viessmann CO detector

  • Page 1 Exclusion of liability No liability is accepted for loss of prof- its, failure to make savings or other direct or indirect consequential losses arising from use of the CO detector, or for losses arising from improper use. 5777 134 GB 6/2016...

  • Page 2: Product Information

    Do not use the above substan- Danger ces in the room in which the CO The CO detector may not pro- detector is installed. vide adequate protection for people with particular medical conditions.

  • Page 3: Acoustic Signal

    Product information (cont.) Indicators: C Error/test (yellow LED) A Test button D Alarm/test (red LED) B Operate (green LED) Acoustic signal: When the alarm or test is triggered, an alarm tone will sound.

  • Page 4: Service Life

    ON/OFF switch. Service life Replace the CO detector after 10 years For the replacement date, see in operation. "Replace by date" on the CO detector.

  • Page 5: Installation Location

    Installation location ■ In the vicinity of the appliance being monitored ■ Close to the ceiling; carbon monoxide is lighter than air and therefore rises...

  • Page 6: Mounting The Co Detector

    Installation location (cont.) Do not install the CO detector in the ■ In draughts caused by open win- following areas: dows, doors or air vents (ventilation ■ Places where an escape of gas could or air conditioning) fail to trigger the alarm, e.g. behind ■...
  • Page 7 Connecting the CO detector to the control unit Danger Route LV leads < 42 V sepa- Incorrect wiring can lead to seri- rately from cables ous injury from electrical current > 42 V/230 V~/400 V~ and and result in appliance damage.

  • Page 8: Maintenance And Function Check

    Connecting the CO detector to the control unit (cont.) 1. Open the control unit enclosure. 2. Insert the CO detector plug into slot X21 on the main PCB. Boiler installation and serv- ice instructions Starting the CO detector Switch ON the power supply via the control unit.

  • Page 9: Specification

    85 dBA/1 m Sensor Electrochemical Declaration of Conformity CO detector We, Viessmann Werke GmbH & Co. KG, D-35107 Allendorf, declare as sole responsible body that the named product complies with the provisions of the follow- ing directives and regulations: 2014/30/EU EMC Directive...
  • Page 10 EN 61000-6-3: 2007 + A1: 2011 + AC: 2012 EN 61508-2: 2010 EN 61508-3: 2010 In accordance with the listed directives, this product is designated with Allendorf, 20 April 2016 Viessmann Werke GmbH & Co. KG Authorised signatory Manfred Sommer...
  • Page 12 Applicability Serial No.: 7549937 Viessmann Werke GmbH & Co. KG Viessmann Limited D-35107 Allendorf Hortonwood 30, Telford Telephone: +49 6452 70-0 Shropshire, TF1 7YP, GB Fax: +49 6452 70-2780 Telephone: +44 1952 675000 www.viessmann.com Fax: +44 1952 675040 E-mail: info-uk@viessmann.com...

Table of Contents