Using The Usb; Audio In (Aux In) Operation - JVC UX-D327B Instruction Manual

Using the USB

By connecting a USB mass storage device (including
USB flash memory, USB flash players or memory cards)
to this unit, you can enjoy the device's stored music
through the unit.
1. Insert the USB device's USB plug into the
socket at the front of unit.
2. Press button on the unit or remote control or
press USB/LINE IN on the remote control to select
the USB source. The word "USB" will be showed on
the display.
3. Press ALBUM+/ALBUM– button to select next/
previous album, and play the first track.
4. Other playback features are the same as if you
were playing an CD.
• The player supports the USB music file format of MP3 only.
• If your USB device is loaded with MP3 files but the display keeps showing 'NO SONG" on the display,
the format of your USB device might not be compatible with the unit.
• The unit can support USB devices with up to 32 GB of memory.
• The unit may not be compatible with all USB devices, this is not an indication of a problem with the
unit.

AUDIO IN (AUX IN) Operation

1. While in ON mode, press
on the remote control to select the LINE IN source. The words "LINE IN" will be shown
on the display.
2. Operate your audio device directly for playback features.
3. Turn the VOL+/VOL– dial on the unit or press the VOL+/VOL– buttons on the remote
control to adjust the volume to your desired level.
button on the unit or remote control or press USB/LINE IN
25