Table of Contents
Advertisement
Starting
your washer
Before starting
your washer:
B
1. Measure
and add detergent
f
2. Place sorted
load in washer.
3. Start washer.
Select a
Select WATER
1. LOAD
SIZE
2.
TEMPERATURES
l
To change
the setting on the LOAD
SIZE SELECTOR, turn the knob to RESET.
l
Then turn the knob to point at a
setting that describes
the size of the
load you want to wash.
l
Set the knob anywhere
on or be-
tween
HAND WASHABLE [a few small
items] and EX LARGE (a full load).
See your "Laundry
Guide"
for details
on load sizes.
l
Select wash and rinse water tem-
peratures
by pushing
a button.
l
This drawing
shows a warm wash
(top temperature)
and cold rinse
(bottom
temperature)
selection.
Recommended
wash temperatures
can be found in your"Laundry
Guide"
and printed
under the washer
lid.
LOAD SIZES AND WATER LEVELS
For best cleaning
results, the
load must be able to move freely
in the water. Too big a load or too
8
DO NOT
little water can cause wear or
OVERLOAD WASHER.
tearing
of load items.
*Approximate
fill with load.
EX-LARGE (20.5 gals.177.6
L)'
MEDIUM (13.9 gals./52.6
L)'
HAND WASHABLE (7.8 gals.129.5
L)'
Advertisement
Table of Contents
