Installation - WEATHER DIRECT AS16 A Manual For Use And Maintenance

Please read this manual carefully and follow the instructions, it will guarantee you
a troublefree operation.
Please refer to the label sticked on the compressor for the product specifications.
A. Installation
1. After taking the compressor out of its packaging, please check it carefully for
any damages due to shipping.
2. Install the compressor on a flat surface in a suitable sized, dry room with
good ventilation, where the temperature is not likely to rise above 94 degrees
Farenheit (35 degrees Centigrades)
3. Be sure the electrical line rating is proper to the appliance (refer to the data
label), that the electrical line is protected and equipped with the ground line.
4. Dispose of the Packing Material in compliance with the regulations in the
country or state where the compressor is installed.
B. Safety
1. Do not use the Compressor for other purpose than the one it has been
designed for.
2. Do not process other fluid than air.
3. Do not operate the compressor in explosive atmosheres, such as in the pres
ence of flammable liquids, gases or dust.
4. Always make sure the unit is unplugged from the electrical line before per
forming any service, maintenance or cleaning.
5. Do not expose this unit to rain or moisture.
6. Do not allow children and other untrained people to use or play with the com
pressor.
7. To avoid risk of burning, be aware that, after intesive use, some compressor
parts could be hot.
8. Do not leave the compressor unattended during its running.