Logging On To The Console - Planet IGS-4215-16T2S Quick Installation Manual

4.1 Logging on to the Console

Once the terminal has been connected to the device, power on the Industrial
Managed Switch and the terminal will display "running testing procedures". Then,
the following message asks to login user name and password. The factory default
user name and password are shown as follows, and the login screen in Figure 4-1
appears.
Username: admin
Password: admin
Figure 4-1: Industrial Managed Switch Console Login Screen
The user can now enter commands to manage the Industrial Managed Switch. For
a detailed description of the commands, please refer to the following chapters.
1. For security reason, please change and memorize the new
password after this first setup.
Note 2. Only accept command in lowercase letter under console interface.
7