Table of Contents
Advertisement
MAGIC CLEAN
lint filter
interior
Soak Cycle
For best results, use warm water for
soaking stained laundry. Hot water can
set stains.
1.
Use recommended
amount of
detergent or presoak
product.
2. Push Cycle Control Knob in.
3. Turn clockwise until indicator points
to the number in the SOAK Cycle.
4. Pull Cycle Control Knob out. The
washer will start.
5. When the cycle is over, add
detergent for the next selected wash
cycle. The SOAK Cycle should al-
ways be followed by a wash cycle.
NOTE:
See the Laundry Guide for
additional soaking information.
MAGIC CLEAN" lint filter
The lint filter at the bottom of the
washer basket cleans itself. During agi-
tation, wash and rinse water pass over
the filter, separating lint from water.
The collected particles of lint are then
continuously spun away from the filter
and washed out of the system at the
end of the wash cycle.
If your washer drains into a tub,
remove any lint collected in the tub
or strainer.
Liquid bleach dispenser
Always measure bleach. Do not guess.
Never use more than 1 cup (250 mL) for
a full load. Use less with lower water
level settrngs. Follow directions on
bottle for safe use. Use a cup with a
pouring spout to avoid spilling.
1. Load the washer first,
2. Pour measured bleach carefully into
dispenser. Do not let bleach splash,
drip or run down into washer basket.
Undiluted bleach will damage any
fabric it touches.
3. Start the washer. Bleach will be
diluted automatically
during the
wash part of the cycle.
11
Advertisement
Table of Contents
