Soak Cycle; Pre-Wash Cycle; Magic Clean@ Lint Filter - Whirlpool LA9500XT Use And Care Manual

lint filter interior
Soak Cycle
For best results, use warm water for
soaking stained laundry. Hot water can
set stains.
1. Use recommended amount of
detergent or pre-soak product.
2. Push Cycle Control Knob in.
3. Turn clockwise until indicator points
to the number in the SOAK Cycle.
4. Pull Cycle Control Knob out. The
washer will start.
5. When the cycle is over, add
detergent for the next selected wash
cycle. The SOAK Cycle should al-
ways be followed by a wash cycle.
NOTE: See the Laundry Guide for
additional soaking information.
Pre-wash Cycle
For best results, use warm water for
pre-washing stained laundry. Hot water
can set stains.
1. Use recommended amount of
pre-soak product or detergent.
2. Push Cycle Control Knob in.
3. Turn clockwise until indicator points
to the number next to PRE-WASH.
4. Pull Cycle Control Knob out. The
washer will start.
5. When the cycle is over, add
detergent for the next selected wash
cycle. The PRE-WASH Cycle should
always be followed by a wash cycle.
NOTE: See the Laundry Guide for
additional pre-washing information.
MAGIC CLEAN" lint filter
The lint filter at the bottom of the
washer basket cleans itself. During agi-
tation, wash and rinse water pass over
the filter, separating lint from water.
The collected particles of lint are then
continuously spun away from the filter
and washed out of the system at the
end of the wash cycle.
If your washer drains into a tub,
remove any lint collected in the tub
or strainer.
11