Whirlpool AT18DK Use And Care Manual page 8

Changing the control settings
If you need to adjust temperatures in the
refrigerator or freezer, use the settings listed
in the chat-l below as a guide.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
REASON:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
RECOMMENDED
CONTROL SETTINGS:
Refrigerator 6
Freezer D
Refrigerator 4
Freezer
A
If Refrigerator
Section is
TOO COLD
Controls not set correctly
Refrigerator 2
for your conditions Freezer A
If ICE isn't
MADE FAST
ENOUGH
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Refrigerator 4
Freezer A
If BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator
Freezer
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your retrigerator.
To remove shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.
To replace shelves:
1. Guide the rear shelf hooks into the slots in the
shelf suc,ports on cabinet wall.
2. Tilt shelf up at front until hooks drop into slots.
Lower front of shelf to level position.
8