Update Firmware - Denon AVR-E200 Service Manual

2. UPDATE FIRMWARE

(1) Connect the update terminal of AV receiver with the "WRITING KIT".
(2) Set the switch of "WRITING KIT". (Refer to the table below.)
DSPBOOT
H
(3) Press the X button to turn the power on of AV receiver.
(4) Set the switch of "WRITING KIT". (Refer to the table below.)
DSPBOOT
H
(5) Press the "RESET" switch of "WRITING KIT".
(6) Run the "STMicroelectronics flash loader.exe" on program file.
(7) Click the "Next" button 3 times.
Click the "Next" button for 1st time.
CE EPM
H L
CE EPM
H
H
25
CNVSS
H
CNVSS
H