Safety Symbols On The Products; Chain Saw, Battery And Charger - Stihl MSA 120 C Instruction Manual

English
3 Chain Sprocket
Drives the saw chain.
4 Tensioning Gear
Shifts the guide bar and tensions or loosens the saw
chain.
5 Bumper Spike
Helps hold the saw steady against the wood during
cutting.
6 Saw Chain
Toothed cutting tool consisting of cutters, tie straps and
drive links.
7 Guide Bar
Supports and guides the saw chain.
8 Chain Sprocket Cover
Covers the chain sprocket.
9 Adjusting Wheel
Permits precise adjustment of saw chain tension.
10 Wingnut
Tightens the chain sprocket cover to the chain saw.
11 Chain Catcher
Helps contain the saw chain and reduce the risk of
operator contact in the event the chain breaks or comes
off the bar.
12 Rear Handle
Handle for the operator's right hand.
13 Locking Lever
Secures the battery in the battery compartment.
14 Battery Compartment
Holds the battery.
15 Front Handle
Handle for the operator's left hand.
16 Oil Filler Cap
Closes and seals the oil tank.
17 Trigger Switch Lockout
Prevents activation of the trigger switch until depressed.
4
18 Trigger Switch
Switches the motor on and off.
19 Battery
Supplies electrical power to the motor.
20 Battery LEDs
Indicate the battery's state of charge and display error
messages regarding potential malfunctions in the battery
or power tool.
21 Push Button
Activates the battery's LEDs.
22 Charger
Charges the battery.
23 Charger LED
Indicates the operating status of the charger.
24 Power Supply Cord
Supplies the charger with electricity when plugged into
an electrical outlet.
25 Plug
Connects the power supply cord to an electrical outlet.
# Rating Plate
Contains electrical information and the product's serial
number.

4 Safety Symbols on the Products

4.1

Chain Saw, Battery and Charger

The following safety symbols are found on the chain saw,
battery and/or charger:
To reduce the risk of injury, follow the specified
safety precautions.
4 Safety Symbols on the Products
0458-716-8221-D