Stihl MS 461 R Instruction Manual page 7

Fitting the holder
a
b
2
Coat inside of hole (a) with STIHL
N
OH 723 press fluid or washing-up
liquid.
Push the holder (2) onto the wrap-
N
around handlebar so that the
recess (b) is as shown in the
illustration.
Position the holder (2) with the
N
recess (b) as shown in the
illustration.
MS 461 R
Assembling wrap-around handlebar
3 4
6 5
7
Push bracket (3) onto center
N
strut (4) and secure to end (5) of
handlebar with M5x20 screw (6)
and washer (7).
Mounting wrap-around handlebar
Slip the handlebar (b) over the saw
N
from the rear and bring it into
position.
Fit the P6x32.5 screws (2).
N
Insert and tighten down the existing
N
P6x19 screws (3).
Fit the combination wrench in the
N
holder.
English
5