Samsung AC160JNH KH Series User Manual page 10

TOPIC
High indoor/
outdoor
temperatures
Power failure
Protection
mechanism
DEMAND RESPONSE MODE (DRM 1, 2, 3)
(ACJNHFKH model only)
This air conditioner is equipped with a Demand Response unit which will respond to a signal sent by the power supply utility
during emergency conditions.
f During a Demand Response Event, the indoor and outdoor unit will be operated according to DRM mode(DRM 1, 2, 3) and f
indoor unit will show "
Away/MDS
Operational Demand
instruction response mode
(OI) (DRM)*
OI 1 DRM 1
OI 2 DRM 2
OI 3 DRM 3
RECOMMENDATION
• I f both indoor and outdoor temperatures are high and the air
conditioner is running in Heat mode, the outdoor unit's fan and
compressor may stop at times. This is normal; wait until the air
conditioner turns on again.
• I f a power failure occurs during the operation of the air conditioner,
the operating immediately stops and unit will be of. When power
returns, the air conditioner will run automatically.
• I f the air conditioner has just been turned on after operation stops or
being plugged in, cool/warm air does not come out for 3 minutes to
protect the compressor of the outdoor unit.
, , " on the display.
AIR CONDITIONER DEMAND RESPONSE MODES
Description of operation in this mode
The air conditioner continues to cool or heat
during the demand response event, but the
electrical energy consumed by the air conditioner
in a half hour period is not more than 50% of the
total electrical energy that would be consumed
if operating at the rated capacity in a half hour
period.
The air conditioner continues to cool or heat
during the demand response event, but the
electrical energy consumed by the air conditioner
in a half hour period is not more than 75% of the
total electrical energy that would be consumed
if operating at the rated capacity in a half hour
period.
Compressor of
Mandatory for compliance
with this Standard (AS/NZS
4755.3.1)
Yes
No
No
11