Bissell PROHEAT 2X LIFT-OFF 1560 Series User Manual page 9

Clean Carpet; Upright Mode
O
Y
Plug into a properly grounded outlet
Indicator light turns on when unit is
plugged in, power switch is pushed and
Pod is seated correctly.
Power
After confirming Formula & Water
Tank is filled properly, press the power
button, located on the Cord Wrap side
If light doesn't Listen for
turn on, reseat two clicks
Pod
Recline
\J^ Pedal
Press recline pedal to release handle.
o
2X Formula
easyfill^
SYSTEM
Press the trigger to apply
solution. Slowly make 2
wet passes, one forward
and one back. Release
the trigger to recover the
dirty solution by slowly
making 2 dry passes, one
forward and one back.
Press trigger to apply
solution. Slowly make 3
wet passes, one forward,
one back and one more
forward. Release the
trigger to recover the dirty
solution by slowly making
a final dry pass back.
NOTE: The ProHeat 2X® Lift-Off® Deep Cleaner nnay be equipped with a circuit
breaker that automatically shuts off the brush if a large or loose object catches in
the brush roll. If that occurs, unplug your machine, remove the foreign object, and
plug the unit back in to reset circuit breaker.
an; or
1!his,:Q©i
www.BISSELL.com