Bissell PROHEAT 2X LIFT-OFF 1560 Series User Manual page 12

Maintenance: Cleaning Machine After Use
AWARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
To clean machine before
storing it, fill the Formula
& Water Tank with hot tap
water only, in order to flush
out any residual formula
Turn unit on, press and
hold the trigger for
15 seconds while making
back and forth passes
Release trigger and
suction up all of the water
Remove the screw
that is within the
clear plastic
Remove the pod from the
base. Press the tabs on the
black ends of the spray tips to
remove and rinse off before
returning them to the base
Unscrew three screws with
a Phillips screwdriver from
the clear Brush Rolls covers
Before replacing clear
cover, inspect the
Brush Rolls and remove
any debris
Wipe out the end caps with a
clean paper towel
Pivot Into place
Rinse and replace clear Brush Covers,
carefully aligning top cover tabs along
front slots of bottom cover
www.BSSELL.com