Led Indications - Brother QL-600 User Manual

Troubleshooting

LED Indications

The LED Indicators light and flash to indicate the Label Printer's status.
or
or
Status LED
(once for 0.5 seconds)
(every two seconds)
LED Indicator is lit in the color shown
or
LED Indicator is flashing in the color shown
or
LED Indicator is off
Power is Off
Idle mode
Feeding mode
Printing mode
Cutting mode
Receiving data
Cancelling the print job
The DK Roll Compartment Cover is open. Close the DK Roll Compartment Cover correctly.
The Label Printer is in Reset mode.
For more information, see Reset Device Settings to the Factory Settings Using the Label
Printer Buttons on page 47.
If the Status LED lights in orange for 0.5 second after printing, the Label Printer is erasing
all print data.
For more information, see Use the Printer Setting Tool for Windows on page 13 or Printer
Setting Tool for Mac on page 19.
The Label Printer is in Cooling mode.
The printer settings are being reset.
For more information, see Reset Device Settings to the Factory Settings Using the Label
Printer Buttons on page 47.
The Label Printer is in Boot mode.
Try updating the firmware.
For more information, see Update the Firmware on page 42.
If the Label Printer is still in Boot mode, contact Brother Customer Service.
Roll end error
No media error
Wrong media error
Feed error
Cover open error
Transferred data error
Condition
10
10
50