Controls That Can Be Used With The Daw; Logic Pro - Tascam 12 Manual

Making various DAW application settings

Controls that can be used with the DAW

The following Model 12 controls can be used to operate the
DAW application.
o F3
button (DAW CONTROLLER MARKER screen)
o F4
button (DAW CONTROLLER MARKER screen)
o F2
button (DAW CONTROLLER TRACK screen)
o F3
button (DAW CONTROLLER TRACK screen)
o F4
button (DAW CONTROLLER TRACK screen)
o MULTI JOG dial (locate function)
o m/, buttons
o 8 button
o 7/9 button
o 0 button
o PAN knobs (1-6, 7/8-9/10)
o REC buttons (1-6, 7/8-9/10)
o MUTE switches (1-6, 7/8-9/10)
o SOLO switches (1-6, 7/8-9/10)
o Channel faders (1-6, 7/8-9/10)
ATTENTION
Immediately after connecting with the DAW as well as after
settings have been made in the DAW, the DAW settings and
the state and positions of the Model 12 buttons, knobs and
faders will not match. In this case, adjust the DAW settings to
match the Model 12 settings, or use the Model 12 buttons,
knobs and faders to match the DAW settings.
12
TASCAM Model 12 DAW Controlmode Manual

Logic Pro

The following screens are from Logic Pro X version 10.4.8.
1.
Click "Logic Pro X" > "Preferences..." > "Advanced Tools..."
2.
Put checks in all the boxes.
3.
Select the "Control Surfaces" page, and click "Setup..."