FI‐7600/FI‐7700
Feed Roller (× 2)/Eject Roller (× 2)
The power must be turned on to rotate the feed/eject rollers.
a. Plug in the power cable and turn on the scanner.
The [Ready] screen is displayed on the LCD.
b. Press the [Menu] button.
The [Settings Menu] screen is displayed on the LCD.
c. Press the [ ] or [ ] button and select [2: Cleaning], then press the
[Scan/Enter] button to confirm.
The [Cleaning] screen is displayed on the LCD.
d. Press the [ ] or [ ] button and select [2: Roller Wipe], then press
the [Scan/Enter] button to confirm.
A message is displayed on the LCD.
e. Open the ADF.
C
R
ONSUMABLE
EPLACEMENT AND
C
I
LEANING
NSTRUCTIONS
CG00002 ‐ 296501