Adjusting Crisper Humidity Control; Removing Crispers And Crisper Covers; Adjusting Shelves; Changing Light Bulbs - Whirlpool ET22MT Use & Care Manual

Adjusting crisper
Humidity Control.. .
You con control the amount of humidity In the mois-
ture-sealed crisper pan.
1. The control can be adjusted to any setting be-
tween LO and HI
2. LO (open] lets moist
air out of crisper for
best storage of fruits
and vegetables
with skins.
3. HI (closed) keeps
moist air in the cris-
per for best storage
of fresh leafy vege-
tables.
11
r* .h' .r.Y ., '? / a..,, -L / 7 .'1 : , i , __." ..= . ._
Removing the crispers and
crisper covers.. .
l
Slide crispers straight out to stop.
l
Lift the front.
l
Slide the rest of the way out.
l
Replace in reverse order.
Covers are held in place by two pegs at the back
and two notched tabs in front.
Push the Tab
to Clear the Cover.
l
Press front tabs out of the way.
0 Lift cover front.
l
Lift back off the pegs.
l
Replace in reverse order.
The center leg can be made shorter or longer to
help level the crisper covers, if necessary. Turn the
leg clockwise to make it longer. Turn it counter-
clockwise to shorten it.
Adjusting shelves.. .
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough to
hold bottles, milk and other heavy food items.
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
Gloss shelves u
heovy Be coref
To replace:
1. Guide the rear hooks into the slots in the shelf
supports.
2. lilt up front of shelf until hooks drop into slot. Lower
front of shelf to level posttion.
To remove door shelves:
l
Lift up and out
To replace:
l
Insert hooks into guides
on both sides.
l
Push down.
h-7 4 :*v%;is , I." 1c .A4 i : si4 &.
Changing the light bulbs...
Before removing the light shield for cleaning or for
replacing the bulb, unplug the refrigerator. Use
apphance buibs on/y
ush in the Center;
ull Down.
l
Light bulb behind light shield:
l
Push lightly on the top center of the light shield
until the notched tab unhooks from the control
panel.
l
Pull down on the shield until the tab clears the
control panel.
l
Lift the bock hooks out of their slots.
l
Replace with a do-watt appliance bulb
l
Replace light shield in reverse order.
l
light bulb behind ice maker:
l
Remove the ice bin [see ice maker
instructions on page 6).
l
Replace with a 40-w&t appliance bulb.
OReplace ice bin.
l
Ught bulb behlnd crispers:
l
Remove crispers and crisper covers.
l
Bulb is on back wall of refrigerator.
l
Replace with a 40-watt appliance bulb.
l
Replace crisper and crisper cover.
l
Plug in the refrigerator.
7