Advertisement
Adjusting shelves.. .
Removing freezer shelf.. .
Shelves can be adjusted
to match the way you use
your refrigerator.
Glass shelves are strong enough to
hold bottles, milk and other heavv food items.
l
Lift front sliahtlv.
l
Lift back 0% supports.
l
Replace
in reverse order.
To remove
glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
Glass shelves ore
1. Guide
the rear hooks into the slots tn the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position
To remove
door shelves:
l
Lift up and out
To replace:
l
Insert hooks into guides
on both sides.
l
Push down.
i
..,
--m-s
^ ..Iam.
z.T.ru+..,*
c QnPS%azze
.la.--
Removing the crispers and
crisper covers.. .
l
Slide crispers straight out to stop.
l
Lift the front.
l
Slide the rest of the way out.
l
Replace
in reverse order.
Covers are held in place by two pegs at the back
and two notched
tabs in front.
Push the lab
to Clear
the Cover.
Snap Back Into Place.
.
'7'
'
l
Press front tabs out of the way.
0 Lift cover front.
l
Lift back off the pegs,
l
Replace
in reverse order.
The center leg can be made
shorter or longer to
help level the crisper covers, if necessary.
Turn the
leg clockwise
to make
it longer.
Turn it counter-
clockwise
to shorten it
6
Lift the Front
Then the Back
a'
*,x.,_ITIIwCa-
-m
eL+*,
.T.
Adjusting
crisper
Humidity
Control...
You can control the amount of humrdity In the mois-
ture-sealed
crisber
The control
can be adjusted
to any setting be-
tween LO and HI
LO (open) lets moist
air out of crisper for
best storage of fruits
and vegetables
with skrns.
HI [closed]
keeps
moist air in the cris-
per for best storage
of fresh leafy vege-
tables
s--G*.--
-,,*
1-%"> .%-WI
u---w--e
Moving the meat pan.. .
The meat pan can be taken out and moved
the
same way as the shelves, Remove the meat pan first.
Removlng:
I, Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight out.
Replaclng:
I, Guide
the rear hooks into the slots in the shelf
supports.
2. Tilt up front of cover until rear hocks drop into slots.
Lower front of cover to level position.
3. Replace
meat pan in reverse order.
,.,Pr.-/n.As -, "ese&zx
Changing the light bulb.. .
Before removing
the lrght shield for cleaning
or for
replaclng
the bulb,
unplug
the refrigerator.
Use
appliance
bulbs only
l
Push lightly on the top center of the light shield until
the notched
tab unhooks from the control panel
l
Pull down
on the shield untrl the tab clears the
control panel.
l
Lift the back hooks out of therr slots.
l
Replace
wrth a 40-watt appliance
bulb.
l
Replace
light shield in reverse order.
Advertisement
