Brother HL-L8250CDN Service Manual page 18

This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter.
Power Cord Safety:
- This product is equipped with a 3-wire grounded plug. This plug will only fit into a
grounded power outlet. This is a safety feature. DO NOT attempt to defeat the purpose of
the grounded plug.
- Only use the power cord supplied with this product.
- This product should be positioned so that nothing pinches or constricts the power cord.
DO NOT allow anything to rest on the power cord. DO NOT place this product where
people may step on the cord. DO NOT place this product in a position where the cord is
stretched or where strain is otherwise put on the cord. Doing so may cause the cord to
become worn or frayed.
- Brother strongly recommends that you DO NOT use any type of extension cord.
- DO NOT put a toner cartridge, a toner cartridge and drum unit assembly, or a waste toner
box into a fire. It could explode, resulting in injuries.
- DO NOT use flammable substances, any type of spray, or an organic solvent/liquid
containing alcohol or ammonia to clean the inside or outside of the product.
Doing so could cause a fire or electrical shock. Instead, use only a dry, lint-free cloth.
DO NOT attempt to operate this product when a paper jam or stray pieces of paper are
inside the product. Prolonged contact of the paper with the fuser unit could cause a fire.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner
dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the
toner dust with a dry, lint-free soft cloth and dispose of it according to local regulations.
viii
Confidential