Table of Contents
Advertisement
Usln
Your Refrigerator
Cont nued
B
Ufl the fronl.
thsnthebaok.
Exterbr molsture control
The Exterior Moisture Control on the Control
Console operates electric heaters around the
door openings. These heaters help keep
moisture from forming on the outside of the
refrigerator.
1. Use the OFF setting when humidity is low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator.
Adjustlng the refrlgemtor shelves
Shelves can be adjusted to match the
way you
use your refrigerator.
To renwe
shelves:
1. Remove items from shelf.
2. Tilt up at front.
3. Liftupatback.
4. Pull shetl straight out.
To replace shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slots.
Lower front of shelf to level position.
Removlng the freezer shelf
To remove shelf:
1.
Lit front slightly.
2. Lii back off supporls.
3. Replace in reverse order.
Adjustlng the door bins
To remove blns:
1. Lii bin up.
2. Pull bin straight out.
To replace blns:
1. Hold back of bin above desired bin guide.
2. Push bin back and down until it stops.
Advertisement
Table of Contents
