Additional Safety Rules; Maintenance - Ryobi EPN-6082 Original Instructions Manual

Safety, performance, and dependability have been given
top priority in the design of your planer.
INTENDED USE
The product is only intended for planing wood (removing
wood.
The product is not intended to be used for stationary
planing.
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result in
Save all warnings and instructions for future reference.
PLANER SAFETY WARNINGS
Wait for the cutter to stop before setting the tool
down. An exposed rotating cutter may engage the
surface, leading to possible loss of control and serious
Hold the power tool by insulated gripping surfaces,
because the cutter may contact its own cord.
Cutting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding
the workpiece by your hand or against the body leaves
it unstable and may lead to loss of control.

ADDITIONAL SAFETY RULES

The dust produced when using this tool may be harmful
to health. Do not inhale the dust. Use a dust absorption
system and wear a suitable dust protection mask.
Remove deposited dust thoroughly, e.g., with a vacuum
cleaner.
Do not remove splinters or saw dust while tool is
running.
Only plane with sharp blades, avoid metals (nails,
Do not reach into the danger area of the tool when
plugged in.
Place the front plate of the machine on to the workpiece
and switch on, before the planer blade touches the
workpiece and then guide evenly over the workpiece.
The v-shape notch in the front of the supporting plate
ensures safe chamfering of edges.
KNOW YOUR PRODUCT
See page 55.
1. Lock-off button
2. Dust flow direction mark
3. Dust flow direction knob
4. Dust bag
5. Dust bag adaptor
6.
7. Depth scale
8. Live tool indicator
9. Power cable
10. Dust outlet
11. Side fence knob
12. Side fence
13. Handle, insulated gripping surface

MAINTENANCE

If the power supply cord is damaged, it must be replaced
only by the manufacturer or by an authorised service
centre to avoid risk. Contact authorised service centre.
If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in
order to avoid a safety hazard.
The tool should never be connected to a power supply
cleaning, performing maintenance, or when the tool is
not in use. Disconnecting the tool will prevent accidental
When servicing use only identical RYOBI replacement
parts. Use of any other parts may create a hazard or
cause product damage.
Replace worn blades with new ones.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils come in contact with
plastic parts. They contain chemicals that can damage,
weaken or destroy plastic.
Electric tools used on fiberglass material, wallboard,
accelerated wear and possible premature failure
because the fiberglass chips and grindings are highly
abrasive to bearings, brushes, commutators, etc.
Consequently, we do not recommend using this tool for
extended work on these types of materials. However, if
you do work with any of these materials, it is extremely
important to clean the tool using compressed air.
EN
English
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
1