Table of Contents
Advertisement
Adjusting Crisper Humidity
Control...
You can
control
the amount
of humidity
in the
moisture-sealed
crisper.
1. The control
can be adjusted
to any setting be-
tween LO and HI.
2. LO (open]
lets moist air out of crisper
for best
storage
of fruits and vegetables
with skins.
3. HI [closed)
keeps moist air in the crisper for best
storage
of fresh leafy vegetables.
Adjusting the refrigerator
shelves...
Shelves can be adjusted
to match the way you use
your refrigerator.
Glass shelves are strong enough
to hold bottles, milk and other heavy
food items.
GLASS SHELVES ARE
HEAVY. BE CAREFUL.
To remove
glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace
glass shelves:
1. Guide
the rear hooks into the slots In the shelf
supports.
2. Tilt up front of shelf until hooks drop
into slot.
Lower front of shelf to level position.
To remove
door shelves:
. Liff up and out.
To replace
door shelves:
1. Insert hooks into guides
on
2. Push down.
both sides
Removing freezer shelf.. .
1. Lift front slightly.
2. Lift back off supports.
3. Replace
in reverse order
Lltt the Front
Then the Back
Removing the crispers
covers...
To remove
the crispers:
1. Slide crisper
straight out to stop.
2. Lift the front.
3. Slide the rest of the way out.
4. Replace
in reverse order.
To remove
the cover:
Covers are held in by two pegs al
two notched
tabs in front.
1.
Press front out of way,
2. Lift cover front.
3. Lift back out of pegs.
4. Replace
in reverse order
6
the back
and
SNAP BACK
INTO PLACE.
If necessary,
the center leg can be made shorter or
longer to help level the crisper covers. Turn the leg
clockwise
to make
it longer. Turn the leg counter-
clockwise
to shorten it.
Advertisement
Table of Contents
