Getting Started; Unpacking; Hooking Up The System - Sony TC-WE305 Operating Instructions Manual

Getting Started

Getting Started

Unpacking

Check that you received the following items:
• Audio connecting cords (2)

Hooking Up the System

This section describes how to hook up the tape deck to
an amplifier. Be sure to turn off the power of each
component before making the connections.
to LINE IN to LINE OUT
to REC OUT
Hookups
When connecting an audio connecting cord, be sure to
match the color-coded cord to the appropriate jacks on
the components: Red (right) to Red and White (left) to
White. Be sure to make connections firmly to avoid
hum and noise.
Connect the tape deck to the amplifier as shown below.
Tape deck
LINE
IN OUT
L
R
ç: Signal flow
EN
4
TC-WE305
to an AC
outlet
to TAPE IN
Amplifier
to a
wall outlet
Amplifier
TAPE
ç
IN REC OUT
L
L
R R
Ç
Setting the voltage selector (only on
models supplied with a voltage selector)
Check that the voltage selector on the rear panel of the
tape deck is set to the local power line voltage. If not,
set the selector to the correct position using a
screwdriver before connecting the AC power cord to
an AC outlet.
VOLTAGE
220V 240V
110V 120V
Connecting the AC power cord
Connect the AC power cord to an AC outlet.
3-856-686-31(1)