Whirlpool ED25PW Use & Care Manual page 12

Using Your Refrigerator
Continued
i
i
K
1 I .
I' I
2. Lift the signal arm so it clicks into the OFF
position. Ice can still be dispensed, but no more
will be made.
3. Lift the front of the storage bin. Pull it out.
4. Empty the bin. Use hot or warm water to melt
the ice if necessary. Never use anything
sharp to break up ice in the bin. This can
damage the bin and dispenser mechanism.
5. Wash with mild detergent. Rinse well. Do not
use harsh or abrasive cleansers or solvents.
6. When replacing the bin, make sure it is pushed
in all the way. Push the signal arm down to the
ON position to restart ice production.
To turn on night light, push LIGHT switch in.
See page 9 for directions for changing dispenser
light.