Operation At Maximum Ventilation Speed; Key Locking; Minimum Brightness Reduction; Deactivation - Daikin FWXT Series Installation And User Manual

5.12

Operation at maximum ventilation speed

Key Operation
Hold the Max Operation key. The function activation will be signalled by the relative
symbol on the display
In this operating mode, you will immediately obtain
maximum power output both in heating and in cooling.
5.13

Key locking

Key Operation
Press both keys + and - at the same time for 3 seconds to activate the local lock up of
all keys, the confirmation is represented by the text bL appearing on the display.
The user will not be able to perform any adjustment and the text bL appears every time
a key is pressed. Repeat the sequence to unlock the keys.
5.14

Minimum brightness reduction

After 20 seconds from the last action the panel brightness
will be reduced to increase the comfort during night use
and on the display will appear the room temperature.
Key Operation
With the panel off press the + key for 5 seconds until the text 01 appears on the
display.
Use the - key to bring the value to 00 and wait 20 seconds to check for the correct
configuration.
5.15

Deactivation

Key Operation
Press the ON stand-by for about 2 s: When the device is in "stand-by" status (no
function) there are no light signals on the display.
The control ensures anti-freeze safety even when set to
stand-by.
5.16

Room temperature probe offset adjustment

In some cases the detected values might not represent
the real temperature due to the fact that the temperature
probe is located in the lower section of the device.
Key Operation
With the panel off hold the - key for 5 seconds to access the menu from which you can
adjust (using the + and - keys) from –10 to +10 K in 0.1 K steps.
After 20 seconds from the last action performed the panel turns off and the setting is
saved.
After reaching the desired room temperature you should
select one of the other 3 operating modes to increase the
thermal and acoustic comfort.
If this level of brightness still bothers you you can turn off
the display completely.
Use this function to adjust the measured value shown on
the display within a range of +/- 10 °C in steps of 0.1 °C.
Use this adjustment carefully and only after having found
actual deviations from the room temperature using a
reliable tool!
Display
Display
bL
Display
00
Display
Off
Display
00.
0
33