Changing The Control Settings - Whirlpool ED22DC Use And Care Manual

3. Give the refrigerator time to cool down
completely before adding food. This may
take several hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls are set correctly
NOTE: The Automatic Exterior Moisture
control continuously guards against moisture
build-up on the outside of your refrigerator
cabinet. This control does not have to be set
or adjusted.
when milk or juice is as cold as you like
and when ice cream is firm. lf you need to
adjust these settings, see "Changing the
control settings" below.
Changing the control settings
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide. If you have
questions, call our Consumer Assistance
Center number, l-800-253-1301.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
Refrigerator
section
too warm
Freezer
section
too warm
Refrigerator
section
too cold
REASON:
l
Door opened often
l
Large amount of food added
l
Room temperature too warm
l
Door opened often
l
Large amount of food
added
l
Very cold room temperature
(can't cycle often enough)
l
Controls not set correctly
for your conditions
RECOMMENDED
CONTROL SElTlNGS:
Refrigerator 4
Freezer
A
Refrigerator 3
Freezer C
Refrigerator 2
Freezer B
Ice not
l
Heavy ice usage
made fast
enough
l
Very cold room temperature
(can't cycle often enough)
Refrigerator 3
Freezer C
Both
sections
too warm
l
Door opened often
l
Large amount of food added
l
Very warm or very cold room
temperatures
Refrigerator 4
Freezer B