Table of Contents
Advertisement
Installing
it properly
1. Allow l/i inch (1.25 cm) space on each
side and at the top of the refrigerator for
ease of installation.
2. If the refrigerator is to be against a wall,
you might want to leave extra space on
the hinge side closest to the wall so the
door can be opened wider.
3. The refrigerator can be flush against the
wall.
4. Make sure ice maker water supply has
been connected.
Refer to Installation
Instructions.
Leveling
it
Your refrigerator has 2 front leveling
screws-one
on the right and one on the left.
To adjust one or both of these, follow the
directions below.
1. Remove base grille. (See page 18.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock-
wise.
4. Check with level.
5. Replace base grille. (See page 18.)
Right to rake;
AI
left to lower
Use a mrew-
driver to adjust
6
Advertisement
Table of Contents
