Set Up Rules And Alerts - Axis M11-E Series User Manual

AXIS M11-E Series
Additional settings
- Increase the compression.
- Turn on dynamic FPS.
Note
Web browsers do not support H.265 decoding. Use a video management system or application supporting H.265 decoding.
Set up network storage
To store recordings on the network, you need to set up network storage:
1. Go to Settings > System > Storage.
2. Click Setup under Network storage.
3. Enter the IP address of the host server.
4. Enter the name of the shared location on the host server.
5. Move the switch if the share requires a login, and enter username and password.
6. Click Connect.
Record and watch video
To record video you must first set up network storage, see Set up network storage on page 11 , or have an SD card installed.
Record video
1. Go to the camera's live view.
2. To start a recording, click Record. Click again to stop the recording.
Watch video
1. Click Storage > Go to recordings.
2. Select your recording in the list and it will play automatically.

Set up rules and alerts

You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text when it records.
Trigger an action
1. Go to Settings > System > Events to set up a rule. The rule defines when the camera will perform certain actions. Rules
can be setup as scheduled, recurring, or for example, triggered by motion detection.
2. Select the Condition that must be met to trigger the action. If you specify more than one condition for the rule, all of the
conditions must be met to trigger the action.
3. Select which Action the camera should perform when the conditions are met.
Note
If you make changes to an active rule, then the rule needs to be restarted for the changes to take effect.
11