Adjusting Meat Pan Temperature; Adjusting The Refrigerator Shelves; Removing Freezer Shelves; Covers - Whirlpool ED19CK Use & Care Manual

Adjusting meat pan temperature.. .
Cold air flows against the
meat pan through an opening
between the freezer and the
refrigerator. This helps keep the
meat pan colder than the rest
of the refrigerator
Set the control to let more or
less cold air through.
Use Control to Adjust
Meat Pan Temperatures
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you
use your refrigerator. If your model has gloss shelves,
be careful. They are heavy
To remove shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace:
1. Guide the rear hooks into the slots In the shelf
supports.
2. Ilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing freezer shelves.. .
1 Lift front slightly
2. Lifi back off supports.
3. Replace in reverse order
Lift the Front
Then the Bat
Removing the crisper, meat pan and covers...
Removing:
1. Slide crisper and meat pan straight out to stop
2. Lift the front
3. Slide the rest of the way out.
4 Replace in reverse order
Replacing:
l
Covers are held in place by two pegs at the back
and two notched tabs in front.
1. Press front tabs out of the way
2. Lifl cover front.
3. Lift back off the pegs.
4. Replace In reverse order.
Removing freezer bin.. .
For proper air movement, keep the freezer bin in
place when the refrigerator is operating.
6
C
To remove the bin:
l
Slide out to the stop.
l
Lift the front to clear the stop.
l
Slide out the rest of the way.
To replace the bln:
l
Place bin on the slides.
l
Make sure the stops
Clear
the front of the slides.
l
Slide bin in.