Precautions - Omron NA Series Practices Manual

２

Precautions

(1) When building an actual system, check the specifications of the component devices
of the system, use within the ratings and specified performance, and implement
safety measures such as safety circuits to minimize the possibility of an accident.
(2) For safe use of the system, obtain the manuals of the component devices of the
system and check the information in each manual, including safety precautions,
precautions for safe use.
(3) It is customer's responsibility to check all laws, regulations, and standards that the
system must comply with.
(4) All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form, or by any means, mechanical,
electronic, photocopying, recording, or otherwise, without the prior written permission
of OMRON.
(5) The information in this guide is current as of March 2020. It is subject to change
without notice because of product's update.
(6) This IAG library has been tested with the system configuration in 3-2 "System
Configuration." However, Omron does not guarantee screen operations after
embedding the IAGs.
Special information in this document is classified as follows:
Precautions for Safe Use
Describes precautions on what to do and what not to do to ensure proper
operation and performance.
Precautions for Correct Use
Describes precautions on what to do and what not to do to ensure proper
operation and performance.
Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation
easier.
Copyrights and Trademarks

Sysmac® is the trademark or registered trademark of Omron Corporation in
Japan and other countries for Omron factory automation products.

Screenshots are used in accordance with Microsoft Corporation guidelines.

Windows and Visual Basic are registered trademarks of Microsoft
Corporation in the United States and other countries.

EtherCAT® is a registered trademark and patented technology, licensed by
Beckhoff Automation GmbH, Germany.
8