Brother QL-1100 User Manual page 53

Print Labels Using P-touch Template
d
Select the transferred template and then click Transfer to download the template to the Key Assign
number in the printer.
e
Scan the P-touch template command barcode.
For more information, see List of Barcodes for the P-touch Template Function on page 121.
f
From the list of barcodes under Basic settings, scan each barcode to send a command or setting to the
printer.
Note
• Settings can be made with multiple commands.
• If you do not scan the barcode commands, a template is printed using the P-touch Template settings. The
default P-touch Template settings are to print a single copy with Auto Cut turned On.
For more information on P-touch Template Setting Tool, download P-touch Template Manual/Command
Reference (English only) from the Brother Solutions Center at support.brother.com/manuals.
• To specify the number of copies you want to print, scan the Number of copies barcode, and then scan the
barcodes under For entering numbers to specify a three-digit number. The setting is automatically applied
when three digits have been specified.
Example:
Specify numbers by scanning the following barcodes: 7i[0][0][7], 15i[0][1][5]
• To change the setting for the number of copies, scan the Number of copies barcode again, and then scan
the barcodes for the new three-digit number.
g
Scan the Select template barcode and then scan the barcodes under For entering numbers with the
same number (three digits) as the Key Assign number used for the downloaded template to be printed.
The downloaded template is automatically selected after the three digit numbers have been scanned.
Example:
Specify the three digit numbers by scanning the following barcodes: 7i[0][0][7], 15i[0][1][5]
6
45