16
Troubleshooting
Overview
This chapter explains how to resolve typical problems you may encounter when using the label printer. If you
have any problems with the printer, first make sure you have performed the following tasks correctly:
Connect the printer to an electrical socket. For more information, see Connect the Power Cord on page 4.
Remove all protective packaging from the printer.
Install and select the correct printer driver. For more information, see Install Printer Drivers and Software
on a Computer on page 9.
Connect the printer to a computer or mobile device. For more information, see Connect the Label Printer
to a Computer on page 9.
Close the DK Roll Compartment Cover completely.
Insert a DK Roll correctly. For more information, see Load the DK Roll on page 5.
If you still have problems, read the troubleshooting tips in this chapter for help. If, after reading this chapter,
you are unable to resolve your problem, visit the Brother Solutions Center at support.brother.com.
16
16
16
110