Memasang kembali unit
display
PERINGATAN: Sebelum mengerjakan bagian dalam komputer, bacalah
informasi keselamatan yang dikirimkan bersama komputer Anda dan
ikuti langkah-langkah di
Komputer. Setelah mengerjakan bagian dalam komputer Anda, ikuti
instruksi di
praktik terbaik tentang keselamatan lainnya, lihat home page
Kepatuhan Regulatori di www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the display hinges with the screw holes on the
computer base.
2
Replace the screws that secure the display hinges to the computer base.
3
Route the display cable through its routing guides on the computer base.
4
Route the antenna cables through its routing guides and slide the
antenna cables through the slot on the computer base.
5
Close the display and turn the computer over.
Post-requisites
1
Follow the procedure from step 3 to step 10 in "Replacing the
board".
2
Follow the procedure from step 2 to step 6 in "Replacing the
3
Replace the keyboard.
4
Replace the
5
Replace the
6
Follow the procedure from step 3 to step 5 in "Replacing the
7
Replace the
8
Replace the battery.
74
Sebelum Mengerjakan Bagian Dalam
Setelah Mengerjakan Bagian Dalam
wireless
card.
memory
modules.
base
panel.
Komputer. Untuk
system
palm
hard
rest".
drive".