Before You Call For Service - Whirlpool SGC355X Use And Care Manual

Before You Call For Service
If you are having an operating problem,
check the chart to see what the cause
might be before you call for assistance.
OPERATING PROBLEM
Nothing operates.
Oven will not operate.
Burner fails to light.
CHECK IF
WHAT TO DO
. Range is properly connected to gas and
i Contact
an authorized RoperSM service
electrical supplies. technician to reconnect range to gas
and/or electrical supply. (See Installation
Instructions.)
. Your home's main fuse has blown or . Replace fuse or reset circuit breaker. In
circuit breaker has tripped.
case of prolonged power failure,
manually light burners (see page 4).
. Control knob is set in the correct
. Set control knob correctly, if needed.
position.
n
The flow of combustion and /or ventila-
m Remove blockage to air flow to and
tion air to the range is blocked. around range.
. Oven Temp Control is turned to a
. Turn Oven Temp Control to the desired
temperature setting. temperature setting, if needed.
. Range is connected to electrical power.
. Contact an authorized RoperSM service
technician to reconnect range to
electrical supply. (See Installation
Instructions.)
. Your home's main fuse has blown or . Replace fuse or reset circuit breaker. In
circuit breaker has tripped. case of prolonged power failure,
manually light burners (see page 4).
. Burner ports are clogged. . Clean with a straight pin (see pages 6
and 8).
Burner flames are uneven.
. Burner ports are clogged. . Clean with a straight pin (see pages 6
and 8). If this fails, call an authorized
RoperSM service technician for service.
Burner flames lift off ports, are
. Contact an authorized RoperSM service
yellow, or are noisy when
technician to check air/gas mixture.
turned off.
Burner makes popping noise
when on.
. Burner is wet from washing
l
Let dry
Page 10