Adjusting Btb; Adjusting Loudness; Adjusting Source Levels - Pioneer Super Tuner III D Operation Manual

Audio Adjustments

Adjusting BTB

You can adjust the currently selected BTB set-
ting as desired. Adjusted BTB settings are
memorized in CUSTOM.
Adjusting bass
You can adjust the bass level.
1 Press AUDIO to select BAS.
Press AUDIO until BAS appears in the display.
2 Press a or b to adjust the bass level.
Each press of a or b increases or decreases
the bass level. +6  6 is displayed as the level
is increased or decreased.
Adjusting treble
You can adjust the treble level.
1 Press AUDIO to select TRE.
Press AUDIO until TRE appears in the display.
2 Press a or b to adjust the treble level.
Each press of a or b increases or decreases
the treble level. +6  6 is displayed as the
level is increased or decreased.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select LOUD.
Press AUDIO until LOUD appears in the dis-
play.
2 Press a to turn loudness on.
LOUD indicator is displayed.
# To turn loudness off, press b.
3 Press c or d to select a desired level.
Each press of c or d selects level in the fol-
lowing order:
LOW (low)HI (high)
Note
You can also turn loudness on or off by pressing
LOUDNESS.

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO to select SLA.
Press AUDIO until SLA appears in the display.
3 Press a or b to adjust the source vo-
lume.
Each press of a or b increases or decreases
the source volume.
SLA +4  SLA 4 is displayed as the source vo-
lume is increased or decreased.
Note
The AM tuner volume level can also be adjusted
with source level adjustments.
Section
06
13
En