Stored Lap Display Function - Ducati Diavel Carbon Owner's Manual

Stored LAP display function

This function displays the stored LAPs.
To access the function it is necessary to view the
"setting" menu page 48, using button (1, fig. 14)
"▲" or (2, fig. 14) "▼" select the "LAP" function and
press the reset button (12, fig. 12) to go to next page.
Use button (1, fig. 14) "▲" or (2, fig. 14) "▼" to
select "LAP DATA" indication and press the reset
button again (12, fig. 12) to enter the page showing
the previously recorded lap times.
The instrument panel displays the information as
follows:
- at top left, the number of the displayed lap (ex.:
LAP N.01);
- at bottom left, a rectangle inside which is the lap
time (TIME), top speed in that lap (SPEED MAX)
and top rpm in the same lap (RPM MAX);
- on the right, use button (1, fig. 14) "▲" or (2, fig.
14) "▼" to select "NEXT" (so that every time the
reset button is pressed (12, fig. 12) the next lap is
displayed) or "PREV" (so that every time the reset
button is pressed (12, fig. 12) the previous lap is
displayed);
To exit, select "EXIT" and press the reset button (12,
fig. 12).
88
Note
The MAX stored speed is indicated on the
display (increased by 5%).
If no lap times are saved in memory, "NO LAP"
indication is displayed and lap timer will indicate
"-.- -.- -", MAX rpm will be = - - - - - - and
MAX speed = - - - - -.
Note
If the stored times are deleted while the LAP
function is active, it will be automatically deactivated.