Using Your Range; Using The Surface Burners - Whirlpool SF3004SR Use & Care Manual

Using your range
LEFT FRONT LEFT REAR
RIGHT FRONT
SURFACE
CONTROL KNOB
CONTROL KNOB
CONTROL KNOB
BURNER
\ , \
INDICATOR
OVEN
RIGHT REAR
CONTROL
CONTROL KNOB
Using the Surface Burners
This range is equipped with standing pilots. Standing pilots must be lit
initially with a match following the directions on page 9. The pilot light will
remain lit when the burners are turned off. To turn a burner on again, just
push in and turn the control knob to LITE and the burner will light.
Control knobs must be pushed in,
then turned to LITE position.
Affer the burner lights, turn the control
knob back to a desired setting.The
control knob can be set anywhere
between HI and a low setting. Do not
cook with the control in the LITE
posltlon.
Surface Burner Indicators
The solid dot in the surface burner
indicator shows which surface burner
is turned on by that knob.