Advertisement
Quick Links
Advertisement
Related Manuals for Hawking H-BT10U
Summary of Contents for Hawking H-BT10U
- Page 1 H-BT10U Bluetooth USB Wireless Adapter...
- Page 2 Thank you for purchasing Hawking Technologies’ H-BT10U USB Wireless Bluetooth Adapter. The H-BT10U is specifically designed to plug into an available Universal Serial Bus port connecting to a desktop or laptop PC. It allows you to make short-range wireless connections between Bluetooth devices such as cellular phones, personal digital assistants (PDA’s), and desktop and notebook...
- Page 3 Note: The CD Software should be installed prior to the hardware installation! Once the installation CD is inserted into the computer’s CD-ROM drive, the Auto-Run function will automatically guide you to start the software installation. If the Auto-Run function is not available, please open the installation CD to find the “setup.exe”...
- Page 4 1. If you wish to connect your H-BT10U to a USB port on your desktop computer, use the included USB adapter cable for better placement flexibility. 2. First, locate the USB host port of your system. Align the USB connector (the thin end) of the USB adapter towards the USB host port;...
- Page 5 4. As soon as the device is properly plugged to your computer, Windows will automatically detect the device and prompt the following message. Select “Install the software automatically (Recommended)” and press Next to continue through the next two screens. 5. Press Finish to complete the hardware installation. It’s that easy!
- Page 6 (Please see the manual for advanced configuration instructions). Click on the configuration icon from the taskbar menu and select the Hardware tab to verify if “USB Bluetooth device” is listed in the device window. If it is listed, your H-BT10U Bluetooth USB Adapter is installed properly.