Cleaning And Caring For Your Range; The Control Panel And Knobs; Surface Units And Reflector Bowls - Whirlpool RS6406XK Use & Care Manual

Cleaning and caring
for your range
CONTROL PANELS AND KNOBS
1.
First make sure knobs are set on OFF then
pull knob stralght off.
A
I
2. Use warm soapy water and a soft cloth to
wipe the panel Rinse and wipe dry.
3. Wash knobs in warm soapy water Rinse
well and dry.
4. Push the knobs straight back on. Make sure
they point to OFF.
10
SURFACE UNITS AND
REFLECTOR BOWLS
REMOVING
1.
Be sure surface units are OFF and COOL.
2. Lift the edge of the unit opposite the recep-
tacle just enough to clearthe reflector bowl.
3. Pull the surface unit straight away from the
recebtacle. 1
4. Lift out the reflector bowl and trim ring
1.
Be sure surface unit controls are OFF.
\
\ Opening
Receptacle
/
2. Line up opening in the reflector bowl and
notch in trim ring with the surface unit
receptacle.