Table of Contents
Advertisement
GENERAL INSTALLATION GUIDELINES
Rigging Instructions for Outdoor Unit
Rigging Multi V S Outdoor Units
• When lifting the unit, use lifting straps and place around the unit as shown.
• Always lift the unit using properly sized lifting straps rated to carry the unit weight.
• Ensure the straps are long enough to maintain a maximum of a 40° angle as shown.
When moving / adjusting the placement of the outdoor unit, always hold the unit by the
corners. Moving the outdoor unit using the side intake holes on the frame may damage
the frame.
Table 4:
3
4
4.4
WARNING
• Use appropriate moving equipment to transport each frame; ensure the equip-
ment is capable of supporting the weights listed above. If unit is not moved
correctly, it may result in an accident that causes physical injury or death.
• Wear protective gloves when handling equipment. Sharp edges may cause
personal injury.
• Some products include polypropylene bands around the unit for packaging.
Do not use polypropylene bands to lift the unit. Bands may break, resulting
in an accident that causes physical injury or death.
• Tear apart and throw away plastic packaging bags so that children may not play with them and risk suffocation and death.
•
from the rigging apparatus. If unit is not supported correctly, it may result in an accident that causes physical injury or death.
•
Do not drop the unit when carrying it with a forklift. It may result in an accident that causes physical injury or death.
• Use a minimum of three (3) lifting straps of at least 26-1/4 feet long. If unit is not supported correctly, it may result in an accident
that causes physical injury or death.
• Always know where the unit's center of gravity is before lifting. Hoist the unit with the center of gravity centered among the lifting
straps. If unit is not hoisted properly, it may result in an accident that causes physical injury or death.
Place a protective cloth or other soft material at the locations where the casing comes in contact with the lifting straps to prevent damage to
painted surfaces.
WARNING
• Remove the wood pallet at the bottom of the outdoor unit base pan before at-
taching any bolts The wood pallet is not a permanent, stable support, and it may
cause the outdoor unit to fall, resulting in physical injury.
• Remove the wood pallet before brazing. The pallet may catch fire, resulting in
physical injury.
to freeze, resulting in operation malfunction.
14
218
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Figure 8: Transporting the Outdoor Unit.
40°
Figure 9: Transporting the Outdoor Unit.
207
Air Outlet Grille
Figure 10: Remove the Wood Pallet.
40°
Air Intake Grille
Corner
Handle
Remove the Wood Pallet
Before Installation
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
